Pendampingan Desain Perencanaan dan Pembuatan Halte Sampah Botol Plastik di Kampung Ratna Chaton
DOI:
https://doi.org/10.24127/sss.v10i2.12Keywords:
Halte Sampah, Botol Plastik, Pendampingan Desain, Kebersihan Lingkungan, Kampung Ratna Chaton.Abstract
Permasalahan sampah plastik, khususnya botol plastik sekali pakai berbahan Polyethylene Terephthalate (PET),
telah menjadi ancaman serius bagi kelestarian lingkungan global maupun lokal karena karakteristik materialnya
yang sangat sulit terurai secara alami di alam. Di wilayah Kampung Ratna Chaton, Kecamatan Seputih Raman,
minimnya infrastruktur pengumpulan sampah yang spesifik mengakibatkan limbah botol plastik seringkali
mencemari lahan terbuka, pemukiman, hingga menyumbat saluran irigasi pertanian warga. Kegiatan pengabdian
masyarakat ini bertujuan untuk melaksanakan pendampingan dalam desain perencanaan serta pembuatan unit
"Halte Sampah Botol Plastik" sebagai sarana edukasi visual dan fasilitas pengumpulan sampah terpilah yang
efisien bagi komunitas desa. Metode pelaksanaan yang diterapkan meliputi tahapan observasi lapangan secara
partisipatif, diskusi terfokus bersama perangkat kampung, perancangan desain teknis berbasis material logam
yang tahan lama, proses fabrikasi mekanik (pemotongan, pengelasan, dan pengecatan), hingga instalasi fisik serta
sosialisasi masif kepada masyarakat. Hasil utama dari program ini adalah tersedianya satu unit fasilitas
penampungan botol plastik yang estetik dan fungsional di lokasi strategis kampung. Dampak nyata dari program
ini terlihat pada peningkatan kesadaran warga dalam memilah sampah botol plastik sejak dari sumber rumah
tangga, yang secara signifikan mengurangi beban pencemaran lingkungan lokal. Melalui keberadaan halte sampah
ini, botol plastik yang terkumpul secara terorganisir dapat dikelola lebih lanjut menjadi komoditas bernilai
ekonomi tinggi atau disalurkan ke bank sampah. Secara keseluruhan, program ini berhasil menciptakan model
pengelolaan sampah berbasis partisipasi komunitas yang berkelanjutan, meningkatkan kebersihan desa, dan
menjadi langkah awal transformasi budaya masyarakat menuju pola hidup bersih dan modern di pedesaan.
References
Amirudin, A., Inoue, C., & Grause, G. (2023). Rethinking Waste Management in Indonesia
Using Public-Private Partnership Framework: A Case Study of Akhmad Amirudin PET
Bottle Waste Management. Nature Environment and Pollution Technology, 22(1), 29–38.
https://doi.org/10.46488/NEPT.2023.v22i01.003
Dalilah, E. A. (2021). Dampak Sampah Plastik Terhadap Kesehatan dan Lingkungan Else Auvi
Dalilah Iik Strada Indonesia Abstrak. Lik Strada Indonesia.
Ekonomi, P. (2023). No 主観的健康感を中心とした在宅高齢者における 健康関連指標
に関する共分散構造分析Title. Bussiness Law Binus, 7(2), 33–48.
http://repository.radenintan.ac.id/11375/1/PERPUS PUSAT.pdf%0Ahttp://business-
law.binus.ac.id/2015/10/08/pariwisata-
syariah/%0Ahttps://www.ptonline.com/articles/how-to-get-better-mfi-
results%0Ahttps://journal.uir.ac.id/index.php/kiat/article/view/8839
Evode, N., Qamar, S. A., Bilal, M., Barceló, D., & Iqbal, H. M. N. (2021). Plastic waste and
its management strategies for environmental sustainability. Case Studies in Chemical and
Environmental Engineering, 4(August). https://doi.org/10.1016/j.cscee.2021.100142
Furqan, M., Jannah, M., Taufiq, T., Salahuddin, S., & Fariadi, D. (2025). Design and
Construction of a Plastic Bottle Waste Collector Integrated with a Microcontroller-Based
IoT System. Journal of Renewable Energy, Electrical, and Computer Engineering, 5(1),
–8. https://doi.org/10.29103/jreece.v5i1.19931
Istirokhatun, T., Siahaan, S. E., Gonzales, R. R., Andarani, P., Susanto, H., & Filardli, A. M.
I. (2025). An Overview of the Utilization of PET Plastic Bottle Waste for Membrane
Fabrication. Jurnal Presipitasi : Media Komunikasi Dan Pengembangan Teknik
Lingkungan, 22(1), 15–37. https://doi.org/10.14710/presipitasi.v22i1.15-37
Khoironi, A., Anggoro, S., & Sudarno, S. (2019). Community behavior and single-use plastic
bottle consumption. IOP Conference Series: Earth and Environmental Science, 293(1).
https://doi.org/10.1088/1755-1315/293/1/012002
Kibria, M. G., Masuk, N. I., Safayet, R., Nguyen, H. Q., & Mourshed, M. (2023). Plastic Waste:
Challenges and Opportunities to Mitigate Pollution and Effective Management. In
International Journal of Environmental Research (Vol. 17, Issue 1). Springer
International Publishing. https://doi.org/10.1007/s41742-023-00507-z
Lilis wardanigsih. (2025). Penyediaan Tempat Sampah Dalam Mewujudkan Lingkungan
Bersih Di Desa Aikmel Utara, Kabupaten Lombok Timur. Jurnal Pengabdian Pendidikan
IPA Kontekstual, 3(3), 106–109. https://doi.org/10.29303/jppik.v3i3.912
Munira, S., Paul, N., Alam, M. A., Rahman, M. M., & Kaiser, M. S. (2024). Turning Trash
into Treasure: Developing an Intelligent Bin for Plastic Bottle Recycling. Journal of
Social Computing, 5(1). https://doi.org/10.23919/JSC.2024.0001
Raka Habib Sutanto, & Rusmanat, Y. (2024). Environmental Education Innovation:
Transforming Household Waste for Sustainable Living. KIRANA : Social Science
Journal, 1(1), 1–8. https://doi.org/10.61579/kirana.v1i1.81
Ridwan, Awaliah, Syamsuddin, Firmanto, T., Hadija, Albanjari, S., Budiman, Maulana, F.,
Musyafir, & Irawan, F. (2024). Utilization Of Non-Organic Waste To Make Crafts From
Ecobrick In Increasing Environmental Law Awareness. Proceeding of International
Conference of Religion, Health, Education, Science and Technology, 1(1), 488–494.
https://doi.org/10.35316/icorhestech.v1i1.5685
Sianipar, H. F. (n.d.). Plan and build a garbage can Automatic as a Motivator of Clean
Civilization in the Campus Environment. 505–513.
Sunaryo, D., Adiyanto, Y., Isnaeni Darmawan, D., & Firdaus, A. (2025). Transforming Plastic
Waste into Ecobricks : Case Study at MAS Al Hidayah, Serang Regency Universitas
Serang Raya, Indonesia. Jurnal Pengabdian Multidisiplin, 2.
https://doi.org/10.62383/fundamentum.v3i2.743Availableonlineat:https://journal.appisi.
or.id/index.php/fundamentum
Yuliana, L., & Limbong, J. Y. (2023). Sosialisasi Pemilahan Sampah dan Redesain Tempat
Sampah Sesuai Klasifikasinya. Abdimas Universal, 5(2), 278–283.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.  Creative Commons Attribution 4.0 International License.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- The author warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author(s).
Creative Commons License
SINAR SANG SURYA: Jurnal Pusat Pengabdian kepada Masyarakat is licensed under a Creative Commons Attribution 4.0 International License.
